What is an Electrical Certificate?
All electrical installations deteriorate with time and should be inspected and tested every 3 to 5 years for continued service. Such safety checks are commonly known as ‘periodic inspection’ or ‘domestic electrical installation condition report’.
An electrical inspection reports will:
- Reveal if any of your electrical circuits or equipment are overloaded.
- Find any potential electric shock risks and fire hazards.
- Identify any defective electrical work.
- Highlight any lack of earthing or bonding.
Who should carry out the electrical certificate inspection and what happens?
Electrical inspection reports or certificates should be carried out only by an accredited, competent person, such as a registered electrician. They will check the condition of the electrics against the UK standard for the safety of electrical installations, BS 7671 – Requirements for Electrical Installations.
Our engineers will inspect and consider all the relevant circumstances and checks on:
· The adequacy of earthing and bonding.
· The suitability of the switchgear and control gear. For example, an old fuse box with a wooden back, cast-iron switches, or a mixture of both will need replacing.
· The serviceability of switches, sockets and lighting fittings. Items that may need replacing include: older round-pin sockets, round light switches, cables with fabric coating hanging from ceiling roses to light fittings, black switches and sockets mounted in skirting boards.
· The type of wiring system and its condition. For example, cables coated in black rubber were phased out in the 1960s. Likewise cables coated in lead or fabric are even older and may well need replacing (modern cables use longer-lasting pvc insulation).
· Making sure you have a fuse box with a suitable residual current device (RCD).
· The presence of adequate identification and notices.
· The extent of any wear and tear, damage or other deterioration.
· Any changes in the use of the premises that have led to, or may lead to, unsafe conditions.
Our engineer will then issue you with an Electrical Installation Condition Report detailing any observed damage, deterioration, defects, dangerous conditions and any non-compliances with the current standard.If any dangerous or potentially dangerous condition or conditions are found, the overall condition of the electrical installation will be declared to be ‘unsatisfactory’, meaning that remedial action is required without delay to remove the risks to those in the premises